Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5311MFF

5300-M Medium Series Bearing
Item #101169034
  • 55 mm ID x 120 mm OD x 1 15/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Select an Auto-Replenish Interval
  • 55 mm ID x 120 mm OD x 1 15/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Inch/Metric Metric
Dynamic Load Rating 119 kN
Origin Double Row Deep Groove
Contact Angle 30 Degree
Fillet Radius 2 mm
Limiting Speed - Sealed 3800 rpm
Enclosure Shield On Both Sides
Seal Material Tinplate
I.D. 2.17 in, 55 mm
Lubricant Grease
Static Load Rating 122 kN
Material Bearing Steel
Width 1.94 in, 49.21 mm
Capacity Maximum Capacity
Bearing Type Unmounted, Angular Contact
Flush Ground No
Cage Material Bearing Steel
Seal Type Non-Contacting Seal
Precision Standard
O.D. Type Cylindrical
Temperature Range [Max] 250 °F
Limiting Speed - Grease 3800 rpm
Limiting Speed - Oil 5000 rpm
Snap Ring No Snap Ring
Temperature Range [Min] -22 °F
Radial Internal Clearance Normal
Inner Ring Width 1.94 in, 49.2 mm
Series 5300M
Radial Internal Clearance Specification Normal Clearance
Ball Material Steel
Static Load Rating [Max] 27400 lbf
Locking Device No Locking Device
Outer Ring Width 1.94 in, 49.2 mm
Rows of Balls Double
No. in Set Single Bearing
Cage Type Metal
Preload Level C3 Axial Clearance
Bore Type Cylindrical
icNumber 7700254
O.D. 4.72 in, 120 mm
Precision Level Standard (ABEC 1)
Weight 5.492 LB
EAN or UPC 97741015233
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison