Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5309MFF

5300-M Medium Series Bearing
Item #100760689
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 45 mm ID x 100 mm OD x 1 9/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Precision Standard
Bearing Type Angular Contact
Lubricant Chevron SRI-2
Temperature Range [Max] 250 °F
Ball Material Steel
Radial Internal Clearance Normal
Seal Type Non-Contact Seals
Preload Level None
Precision Level Standard (ABEC 1)
Dynamic Load Rating 18200 lbf
Limiting Speed - Oil 6000 rpm
Temperature Range [Min] -22 °F
Radial Internal Clearance Specification Normal Clearance
Bore Type Round Bore
Static Load Rating 80 kN
No. in Set Single Bearing
Contact Angle 30°
Inch/Metric Metric Bore
Series 5300M
Flush Ground No
Locking Device No Locking Device
Cage Type Metal
O.D. 100 mm
Material Steel
Fillet Radius 1.5 mm
Limiting Speed - Sealed 4500 rpm
Capacity Maximum Capacity
icNumber 7700262
Seal Material Metal
Outer Ring Width 1 9/16 in
Inner Ring Width 1 9/16 in
Limiting Speed - Grease 4500 rpm
O.D. Type Straight
Static Load Rating [Max] 18000 lbf
Cage Material Steel
Width 39.688 mm
Enclosure Double Shielded
I.D. 45 mm
Snap Ring No Snap Ring
Origin Double Row Deep Groove
Rows of Balls Double
Weight 3.139 LB
EAN or UPC 97741014847
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison