Skip to content Skip to navigation menu
Double Row Cylindrical Bore Angular Contact Ball Bearing

5309CG

Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169017
  • Unmounted, Angular Contact Bearing
  • 1.77 in Inner Diameter
  • 4.19 in Outer Diameter
  • 1.56 in Width
  • Bearing Steel Material
  • Cylindrical O.D
  • 1.56 in Outer Ring Width
  • Double Row
  • Metric
+ Show More + Show Less
Double Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Unmounted, Angular Contact Bearing
  • 1.77 in Inner Diameter
  • 4.19 in Outer Diameter
  • 1.56 in Width
  • Bearing Steel Material

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Fillet Radius 1.5 mm
Locking Device No Locking Device
Precision Level Standard (ABEC 1)
Inner Ring Width 1.56 in, 39.7 mm
Bearing Type Unmounted, Angular Contact
Seal Type Unsealed
Dynamic Load Rating 72.8 kN
Inch/Metric Metric
Static Load Rating 53 kN
Snap Ring With Snap Ring
Flush Ground No
O.D. 4.19 in, 106.5 mm
Limiting Speed - Oil 6000 rpm
No. in Set Single Bearing
O.D. Type Cylindrical
Radial Internal Clearance Specification Normal Clearance
Cage Material Bearing Steel
Material Bearing Steel
Contact Angle 30 Degree
Bore Type Cylindrical
Outer Ring Width 1.56 in, 39.7 mm
Rows of Balls Double
Preload Level C3 Axial Clearance
icNumber 7699759
I.D. 1.77 in, 45 mm
Temperature Range [Max] 450 °F
Seal Material None
Lubricant Oil Preservative
Capacity Standard Capacity
Locating Snap Ring Fitted
Static Load Rating [Max] 11900 lbf
Origin Double Row Deep Groove
Enclosure Open
Width 1.56 in, 39.69 mm
Series 5300C
Limiting Speed - Grease 4500 rpm
Ball Material Steel
Cage Type Metal
Precision Standard
Limiting Speed - Sealed 4500 rpm
Radial Internal Clearance C3
Weight 2.88 LB
EAN or UPC 97741014779
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison