Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5306MFG

5300-M Medium Series Bearing
Item #101170755
  • 30 mm ID x 72 mm OD x 1 3/16" Wide
  • Single Shield
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 30 mm ID x 72 mm OD x 1 3/16" Wide
  • Single Shield
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Series 5300M
Lubricant Oil Preservative
Locating Snap Ring Fitted
icNumber 7704575
Cage Type Metal
Seal Type Non-Contacting Seal
Ball Material Steel
Static Load Rating 43 kN
Seal Material Tinplate
O.D. Type Cylindrical
Radial Internal Clearance Normal
Cage Material Bearing Steel
Precision Level Standard (ABEC 1)
Contact Angle 30 Degree
Inner Ring Width 1.19 in, 30.16 mm
Inch/Metric Metric
Static Load Rating [Max] 9670 lbf
O.D. 2.83 in, 72 mm
Snap Ring With Snap Ring
Limiting Speed - Oil 8500 rpm
Outer Ring Width 1.19 in, 30.16 mm
Width 1.19 in, 30.16 mm
Bore Type Cylindrical
Preload Level C3 Axial Clearance
Fillet Radius 1 mm
Precision Standard
Limiting Speed - Sealed 6300 rpm
Limiting Speed - Grease 6300 rpm
Material Bearing Steel
Radial Internal Clearance Specification Normal Clearance
I.D. 1.18 in, 30 mm
Rows of Balls Double
Bearing Type Unmounted, Angular Contact
Enclosure Shield On One Side
Capacity Maximum Capacity
Dynamic Load Rating 46.8 kN
No. in Set Single Bearing
Locking Device No Locking Device
Flush Ground No
Weight 1.274 LB
EAN or UPC 97741014250
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison