 
            - 30 mm ID x 72 mm OD x 1 3/16" Wide
- Double Shielded
- No Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
| Flush Ground | No | 
| Temperature Range [Min] | -22 °F | 
| Cage Type | Metal | 
| Seal Material | Metal | 
| Preload Level | None | 
| Contact Angle | 30° | 
| icNumber | 7700256 | 
| Radial Internal Clearance | Normal | 
| Temperature Range [Max] | 250 °F | 
| Cage Material | Steel | 
| Inch/Metric | Metric Bore | 
| Lubricant | Chevron SRI-2 | 
| Fillet Radius | 1 mm | 
| O.D. | 72 mm | 
| Radial Internal Clearance Specification | Normal Clearance | 
| O.D. Type | Straight | 
| Locking Device | No Locking Device | 
| Enclosure | Double Shielded | 
| Width | 30.163 mm | 
| Limiting Speed - Sealed | 6300 rpm | 
| Snap Ring | No Snap Ring | 
| Inner Ring Width | 1 3/16 in | 
| Precision | Standard | 
| Limiting Speed - Grease | 6300 rpm | 
| Precision Level | Standard (ABEC 1) | 
| Limiting Speed - Oil | 8500 rpm | 
| Origin | Double Row Deep Groove | 
| Ball Material | Steel | 
| Outer Ring Width | 1 3/16 in | 
| Rows of Balls | Double | 
| No. in Set | Single Bearing | 
| Capacity | Maximum Capacity | 
| Series | 5300M | 
| Material | Steel | 
| Bearing Type | Angular Contact | 
| I.D. | 30 mm | 
| Static Load Rating | 43 kN | 
| Dynamic Load Rating | 10500 lbf | 
| Seal Type | Non-Contact Seals | 
| Bore Type | Round Bore | 
| Static Load Rating [Max] | 9670 lbf | 
| Weight | 1.256 LB | 
| EAN or UPC | 97741014236 | 
 
        
