Find a Service Center
Alternate Products
- 10 mm ID x 35 mm OD x 3/4" Wide
- Open
- No Snap Ring
- Standard Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
- No filling notches
- Fully meets the requirements of American Petroleum Institute Specification 610
- Both the inner and outer rings have closure grooves
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
| icNumber | 7698899 |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Normal Clearance |
| Width | 19.050 mm |
| Bearing Type | Angular Contact |
| Contact Angle | 30° |
| Cage Type | Metal |
| Limiting Speed - Oil | 20000 rpm |
| Preload Level | None |
| Seal Type | Unsealed |
| Seal Material | None |
| Static Load Rating [Max] | 1370 lbf |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 3/4 in |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Rows of Balls | Double |
| Limiting Speed - Sealed | 15000 rpm |
| O.D. | 35 mm |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 2380 lbf |
| Outer Ring Width | 3/4 in |
| Fillet Radius | 0.64 mm |
| Enclosure | Open |
| Cage Material | Steel |
| Limiting Speed - Grease | 15000 rpm |
| Material | Steel |
| I.D. | 10 mm |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Weight | 0.22 LB |
