Skip to content Skip to navigation menu
5200-M Light Series Bearing

5210MFG

5200-M Light Series Bearing
Item #102146190
  • 50 mm ID x 90 mm OD x 1 3/16" Wide
  • Single Shield
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5200-M Light Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 50 mm ID x 90 mm OD x 1 3/16" Wide
  • Single Shield
  • With Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Thrust load should be carried on the nonfilling notch row
  • Moderate thrust load is permissible on the filling notch row

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Limiting Speed - Grease 4800 rpm
Lubricant Oil Preservative
Flush Ground No
Material Bearing Steel
Radial Internal Clearance Specification Normal Clearance
O.D. Type Cylindrical
Preload Level C3 Axial Clearance
Seal Material Tinplate
O.D. 3.8 in, 96.5 mm
Locating Snap Ring Fitted
Bearing Type Unmounted, Angular Contact
icNumber 7699710
Static Load Rating 58.5 kN
I.D. 1.97 in, 50 mm
Inch/Metric Metric
Ball Material Steel
Limiting Speed - Oil 6300 rpm
Rows of Balls Double
No. in Set Single Bearing
Fillet Radius 1 mm
Enclosure Shield On One Side
Dynamic Load Rating 53.9 kN
Outer Ring Width 1.19 in, 30.16 mm
Seal Type Non-Contacting Seal
Contact Angle 30 Degree
Precision Standard
Locking Device No Locking Device
Capacity Maximum Capacity
Bore Type Cylindrical
Cage Type Metal
Series 5200M
Cage Material Bearing Steel
Precision Level Standard (ABEC 1)
Width 1.19 in, 30.16 mm
Limiting Speed - Sealed 4800 rpm
Static Load Rating [Max] 13200 lbf
Radial Internal Clearance Normal
Inner Ring Width 1.19 in, 30.16 mm
Snap Ring With Snap Ring
Weight 2.0 LB
EAN or UPC 97741012232
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison