Skip to content Skip to navigation menu
5200-C, 5200-SB Light Series Bearing

5206CZ

5200-C, 5200-SB Light Series Bearing
Item #102136370
  • 30 mm ID x 62 mm OD x 15/16" Wide
  • Single Seal
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5200-C, 5200-SB Light Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 30 mm ID x 62 mm OD x 15/16" Wide
  • Single Seal
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Limiting Speed - Oil 9500 rpm
Enclosure Seal On One Side
Material Bearing Steel
icNumber 7702688
Rows of Balls Double
Ball Material Steel
Bore Type Cylindrical
Contact Angle 30 Degree
Outer Ring Width 0.94 in, 23.81 mm
Static Load Rating [Max] 4590 lbf
Seal Type Contacting Seal
Inner Ring Width 0.94 in, 23.81 mm
Locking Device No Locking Device
Radial Internal Clearance Normal
Precision Standard
Dynamic Load Rating 28.6 kN
Fillet Radius 1 mm
Limiting Speed - Sealed 7000 rpm
Snap Ring No Snap Ring
Preload Level C3 Axial Clearance
Seal Material Nitrile Rubber (NBR)
O.D. 2.44 in, 62 mm
Cage Material Bearing Steel
Limiting Speed - Grease 7000 rpm
Lubricant Oil Preservative
Series 5200C
Static Load Rating 20.4 kN
O.D. Type Cylindrical
Flush Ground No
Capacity Standard Capacity
Cage Type Metal
Width 0.94 in, 23.81 mm
Precision Level Standard (ABEC 1)
I.D. 1.18 in, 30 mm
Radial Internal Clearance Specification Normal Clearance
Inch/Metric Metric
Bearing Type Unmounted, Angular Contact
No. in Set Single Bearing
Weight 0.687 LB
EAN or UPC 97741011365
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison