Find a Service Center
Alternate Products
- 17 mm ID x 40 mm OD x 11/16" Wide
- Single Shield
- With Snap Ring
- Standard Capacity
- Double Row Ball Bearing
applications
- Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
- Bearings will take heavy radial loads and axial loads equally in either direction
| Fillet Radius | 0.64 mm |
| O.D. | 40 mm |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Contact Angle | 30° |
| Bore Type | Round Bore |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| I.D. | 17 mm |
| Static Load Rating [Max] | 1980 lbf |
| Material | Steel |
| Locking Device | No Locking Device |
| icNumber | 7704786 |
| Precision | Standard |
| Snap Ring | With Snap Ring |
| Enclosure | Single Shield |
| Bearing Type | Angular Contact |
| Lubricant | Oil Preservative |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | Normal |
| Preload Level | None |
| Dynamic Load Rating | 3210 lbf |
| Outer Ring Width | 11/16 in |
| Ball Material | Steel |
| Limiting Speed - Grease | 10000 rpm |
| O.D. Type | Straight w/ Snap Ring |
| Inner Ring Width | 11/16 in |
| Limiting Speed - Oil | 15000 rpm |
| Rows of Balls | Double |
| Limiting Speed - Sealed | 10000 rpm |
| Cage Type | Metal |
| Seal Type | Non-Contact Seals |
| Width | 17.463 mm |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Normal Clearance |
| Weight | 0.23 LB |
