Find a Service Center
- 5 mm ID x 19 mm OD x 6 mm Wide
- Single Seal
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Suitable for high speed fractional horsepower motors and small turbines
| Cage Type | Metal |
| Preload Level | None |
| Seal Type | Contact Seals |
| Inner Ring Width | 6 mm |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| Seal Material | Rubber |
| I.D. | 5 mm |
| icNumber | 7703673 |
| Snap Ring | No Snap Ring |
| Cage Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Limiting Speed - Sealed | 26000 rpm |
| No. in Set | Single Bearing |
| Radial Internal Clearance | Normal |
| Rows of Balls | Single |
| Ball Material | Steel |
| Contact Angle | 0° |
| Outer Ring Width | 6 mm |
| Limiting Speed - Grease | 36000 rpm |
| Static Load Rating [Max] | 214 lbf |
| Enclosure | Single Seal |
| O.D. Type | Straight |
| O.D. | 19 mm |
| Dynamic Load Rating | 497 lbf |
| Lubricant | Oil Preservative |
| Limiting Speed - Oil | 43000 rpm |
| Width | 6.000 mm |
| Material | Steel |
| Fillet Radius | 0.3 mm |
| Precision | Standard |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| Weight | 0.02 LB |
