Find a Service Center
- Single Row Dynamometer Bearing, 65 mm ID x 140 mm OD x 33 mm Wide, Open, Medium Precision (ABEC 5), Phenolic Cage, Special Internal Clearance, 15° Contact Angle, Maximum Capacity
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Limiting Speed - Grease | 4800 rpm |
| Inner Ring Width | 33 mm |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 20900 lbf |
| Width | 33.000 mm |
| Contact Angle | 15° |
| Precision Level | Medium Precision (ABEC 5) |
| Material | Steel |
| No. in Set | Single Bearing |
| Cage Type | Phenolic |
| Outer Ring Width | 33 mm |
| Cage Material | Phenolic |
| Ball Material | Steel |
| Dynamic Load Rating | 27200 lbf |
| Lubricant | Oil Preservative |
| Precision | Medium |
| Capacity | Maximum Capacity |
| Locking Device | No Locking Device |
| Temperature Range [Max] | 225 °F |
| icNumber | 7704188 |
| Seal Type | Unsealed |
| Bore Type | Round Bore |
| Fillet Radius | 2 mm |
| Limiting Speed - Oil | 5600 rpm |
| Origin | Single Row Radial |
| Radial Internal Clearance Specification | Special Radial Clearance |
| I.D. | 65 mm |
| O.D. | 140 mm |
| Rows of Balls | Single |
| Seal Material | None |
| Preload Level | None |
| O.D. Type | Straight |
| Enclosure | Open |
| Bearing Type | Dynamometer |
| Inch/Metric | Metric Bore |
| Weight | 5.0 LB |
| EAN or UPC | 97741008846 |
