Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
- Special internal radial clearance
- Special E grade balls
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
| Precision Level | Medium Precision (ABEC 5) |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Material | Steel |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Rows of Balls | Single |
| Temperature Range [Max] | 225 °F |
| No. in Set | Single Bearing |
| Preload Level | None |
| Bearing Type | Dynamometer |
| Seal Material | None |
| Seal Type | Unsealed |
| Ball Material | Steel |
| Inch/Metric | Metric Bore |
| Locking Device | No Locking Device |
| Cage Material | Phenolic |
| Capacity | Maximum Capacity |
| Bore Type | Round Bore |
| Contact Angle | 15° |
| Weight | 0.0 LB |
