Find a Service Center
- 20 mm ID x 52 mm OD x 7/8" Wide
- Double Shielded
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- For applications where space for a lubrication system is limited or conditions demand a larger grease supply inside bearing
features
- Single-row radial deep groove bearing with no filling notches
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
- Extra large grease chamber packed with high quality lubricant
| Snap Ring | With Snap Ring |
| Width | 22.225 mm |
| Radial Internal Clearance | Normal |
| No. in Set | Single Bearing |
| Limiting Speed - Oil | 16000 rpm |
| Inch/Metric | Metric Bore |
| Contact Angle | 0° |
| Precision | Standard |
| O.D. Type | Straight w/ Snap Ring |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 13000 rpm |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Cage Type | Metal |
| Limiting Speed - Sealed | 9500 rpm |
| Fillet Radius | 1 mm |
| Material | Steel |
| Bore Type | Round Bore |
| Outer Ring Width | 7/8 in |
| Enclosure | Double Shielded |
| Lubricant | Polyurea Base |
| icNumber | 7701762 |
| Cage Material | Steel |
| Static Load Rating [Max] | 1750 lbf |
| Bearing Type | Radial |
| I.D. | 20 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Dynamic Load Rating | 3570 lbf |
| Seal Type | Non-Contact Seals |
| Rows of Balls | Single |
| O.D. | 52 mm |
| Inner Ring Width | 7/8 in |
| Preload Level | None |
| Seal Material | Metal |
| Weight | 0.49 LB |
