Find a Service Center
- 30 mm ID x 47 mm OD x 9 mm Wide
- Double Sealed
- With Snap Ring
- Single Row Radial Steel Bearing
applications
- Designed for applications where a lack of space or limitations on weight require a bearing with a thinner section
features
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
- Single-row radial conrad-type bearings that can accommodate light radial loads, two-directional thrust loads, or a combination of both 102921000
- 0
- Extra wide and hardened gears"
| O.D. | 47 mm |
| Inch/Metric | Metric Bore |
| Preload Level | None |
| Bore Type | Round Bore |
| Cage Type | Metal |
| I.D. | 30 mm |
| Enclosure | Double Sealed |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 1120 lbf |
| Radial Internal Clearance Specification | Normal Clearance |
| Fillet Radius | 0.3 mm |
| Cage Material | Steel |
| O.D. Type | Straight w/ Snap Ring |
| Inner Ring Width | 9 mm |
| Precision Level | Standard (ABEC 1) |
| Limiting Speed - Sealed | 8500 rpm |
| Snap Ring | With Snap Ring |
| Radial Internal Clearance | Normal |
| Dynamic Load Rating | 1640 lbf |
| Limiting Speed - Grease | 14000 rpm |
| Precision | Standard |
| Lubricant | Polyurea Base |
| Contact Angle | 0° |
| Bearing Type | Radial |
| Ball Material | Steel |
| Seal Type | Contact Seals |
| Material | Steel |
| No. in Set | Single Bearing |
| Outer Ring Width | 9 mm |
| icNumber | 7701822 |
| Limiting Speed - Oil | 17000 rpm |
| Seal Material | Rubber |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Width | 9.000 mm |
| Weight | 0.12 LB |
