
- 90 mm ID x 115 mm OD x 13 mm Wide
- Double Shielded
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Designed for applications where space or weight is very limited
features
- 0
- Can carry significant radial loads"
- Can carry significant radial loads
- Can carry substantial thrust loads in either direction, even at very high speeds
- Supplied with a pressed steel cage
- Single-row radial conrad-type bearings that can accommodate light radial loads, two-directional thrust loads, or a combination of both 104015724
Snap Ring | No Snap Ring |
Cage Material | Steel |
Seal Type | Non-Contact Seals |
Inner Ring Width | 13 mm |
Dynamic Load Rating | 4380 lbf |
Limiting Speed - Oil | 6300 rpm |
Rows of Balls | Single |
Width | 13.000 mm |
Inch/Metric | Metric Bore |
Material | Steel |
Bearing Type | Radial |
Radial Internal Clearance Specification | Normal Clearance |
Contact Angle | 0° |
Lubricant | Polyurea Base |
Enclosure | Double Shielded |
Limiting Speed - Sealed | 3200 rpm |
Ball Material | Steel |
icNumber | 7698003 |
Preload Level | None |
O.D. Type | Straight |
Bore Type | Round Bore |
Static Load Rating [Max] | 4590 lbf |
Limiting Speed - Grease | 5300 rpm |
Outer Ring Width | 13 mm |
No. in Set | Single Bearing |
Locking Device | No Locking Device |
Capacity | Standard Capacity |
Seal Material | Metal |
Precision Level | Standard (ABEC 1) |
Fillet Radius | 1 mm |
O.D. | 115 mm |
Cage Type | Metal |
Precision | Standard |
I.D. | 90 mm |
Radial Internal Clearance | Normal |
Weight | 0.62 LB |
EAN or UPC | 97741024983 |
