Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 2 15/16" Shaft
- 3 3/4" Centerline to Base
- 13" Base Length
- 10 5/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pedestal | P 04 |
| End Type | Open End |
| Housing Material | Cast Iron |
| Temperature Range [Max] | 212 °F |
| Bolt Hole Spacing Range [Max] | 11 in |
| Base Width | 3 in |
| Housing Height | 8 1/8 in |
| RPM [Max] | 3310 rpm |
| Base Length | 13 in |
| Temperature Range [Min] | 32 °F |
| Insert Type | Split Steel Insert |
| Bearing Design | Non-Expansion |
| Dynamic Load Rating | 29200 lbf |
| Bolt Holes | 2 |
| Seal Type | Triple Labyrinth Seals |
| Shaft Dia. | 2.9375 in |
| Base Height | 1 1/2 in |
| Locking Device | Clamping Ring Collar |
| Housing Construction | 2 Piece |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Min] | 10 1/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 10 5/8 in |
| Static Load Rating [Max] | 35300 lbf |
| Axial Load | 1710 lbf |
| Series | 01 Series |
| Bearing Type | Split Cylindrical |
| Bolt Size | 3/4 in |
| Weight | 32.956 LB |
| EAN or UPC | 7316577348746 |
