Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 11/16" Shaft
- 2 3/4" Centerline to Base
- 10 5/8" Base Length
- 8 7/16" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base Length | 10 5/8 in |
| Bearing Design | Non-Expansion |
| Axial Load | 810 lbf |
| Housing Height | 6 1/4 in |
| Bolt Holes | 2 |
| Temperature Range [Max] | 212 °F |
| RPM [Max] | 4630 rpm |
| Locking Device | Clamping Ring Collar |
| Bolt Hole Spacing Range [Min] | 8 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Height | 1 in |
| Series | 01 Series |
| Temperature Range [Min] | 32 °F |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 8 7/16 in |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Shaft Dia. | 1.6875 in |
| Housing Construction | 2 Piece |
| Insert Type | Split Steel Insert |
| End Type | Open End |
| Pedestal | P 02 |
| Dynamic Load Rating | 16800 lbf |
| Static Load Rating [Max] | 18000 lbf |
| Base Width | 2 3/8 in |
| Bolt Hole Spacing Range [Max] | 8 7/8 in |
| Bearing Type | Split Cylindrical |
| Pillow Block Type | Thru-Bolt |
| Bolt Size | 5/8 in |
| Seal Type | Triple Labyrinth Seals |
| Weight | 17.094 LB |
| EAN or UPC | 7316579327893 |
