Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 35 mm Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Axial Load | 720 lbf |
| Pedestal | P 01 |
| Inch/Metric | Metric |
| Seal Type | Triple Labyrinth Seals |
| Dynamic Load Rating | 14600 lbf |
| Housing Material | Cast Iron |
| End Type | Open End |
| Temperature Range [Min] | 32 °F |
| Bolt Hole Spacing | 7 1/8 in |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 35 mm |
| Series | 01 Series |
| Temperature Range [Max] | 212 °F |
| Bolt Holes | 2 |
| Housing Construction | 2 Piece |
| Base Length | 9 in |
| RPM [Max] | 5400 rpm |
| Housing Height | 5 1/2 in |
| Locking Device | Clamping Ring Collar |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Static Load Rating [Max] | 15100 lbf |
| Bolt Size | 1/2 in |
| Bearing Type | Split Cylindrical |
| Lubrication | Relubricatable |
| Insert Type | Split Steel Insert |
| Bolt Hole Spacing Range [Min] | 6.75 |
| Base Width | 2 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Base Height | 7/8 in |
| Weight | 11.902 LB |
| EAN or UPC | 7316577841988 |
