Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 1/2" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Electrical machinery
- Mechanical handling
- Conveyors
- Paper manufacturing
- Fans
- Haulage
- Winders
- Headgear
- Marine
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bolt Hole Spacing Range [Min] | 6.75 |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Bearing Type | Split Cylindrical |
| Seal Type | Triple Labyrinth Seals |
| Mounted Unit Duty | Heavy-Duty |
| Shaft Dia. | 1.5 in |
| Base Width | 2 3/8 in |
| Housing Material | Cast Iron |
| Dynamic Load Rating | 14600 lbf |
| RPM [Max] | 5400 rpm |
| Inch/Metric | Inch |
| Series | 01 Series |
| Base Length | 9 in |
| Bearing Design | Non-Expansion |
| Insert Type | Split Steel Insert |
| End Type | Open End |
| Bolt Size | 1/2 in |
| Temperature Range [Max] | 212 °F |
| Locking Device | Clamping Ring Collar |
| Housing Construction | 2 Piece |
| Pedestal | P 01 |
| Bolt Holes | 2 |
| Temperature Range [Min] | 32 °F |
| Static Load Rating [Max] | 15100 lbf |
| Housing Height | 5 1/2 in |
| Bolt Hole Spacing | 7 1/8 in |
| Lubrication | Relubricatable |
| Axial Load | 720 lbf |
| Base Height | 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Weight | 11.638 LB |
| EAN or UPC | 7316579323307 |
