Find a Service Center
Alternate Products
- Unmounted, Angular Contact Bearing
- 0.59 in Inner Diameter
- 1.38 in Outer Diameter
- 0.43 in Width
- Bearing Steel Material
description
- Single lip, spring-loaded design without inner cases. Where operating conditions exceed standard materials, type CRW offers a wide range of special materials.
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Metric |
| Seal Design | Molded Design |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Shaft Dia. | 19 mm |
| Lip Material | Nitrile |
| Seal Application | General Purpose |
| Case Construction | Rubber Covered Steel Case |
| Lip Type | Single Lip w/Spring |
| Housing Bore Dia. | 27 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| O.D. | 1.38 in, 35 mm |
| Lip Style | Internal |
| Construction | HMS4 |
| Spring Material | Carbon Steel Garter |
| Material | Bearing Steel |
| Bearing Type | Unmounted, Angular Contact |
| Contact Angle | 29 Degree |
| Inner Ring Width | 0.43 in, 11 mm |
| O.D. Type | Cylindrical |
| Width | 0.43 in, 11 mm |
| Series | 7200 |
| Outer Ring Width | 0.43 in, 11 mm |
| Flush Ground | No |
| Cage Material | Bearing Steel |
| I.D. | 0.59 in, 15 mm |
| Bore Type | Cylindrical |
| Weight | 0.022 LB |
