Find a Service Center
- Radial Shaft Seal
- 1 1/4 in Shaft Diameter
- 2.835 in Housing Bore Diameter
- 3/8 in Width
| Seal Width | 3/8 in |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HMSA7 |
| Inch/Metric | Inch |
| Lip Type | Dual Lip w/One Spring |
| Seal Design | Molded Design |
| Shaft Dia. | 1.25 in |
| Lip Material | Nitrile |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 2.835 in |
| Seal Application | Light Dirt Exclusion |
| Temperature Range [Max] | 225 °F |
| Case Construction | Rubber Covered Steel Case |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.128 LB |
| EAN or UPC | 85311899963 |
