Find a Service Center
- Single Row Radial Bearing, 35 mm ID x 72 mm OD x 17 mm Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Conrad-type ball bearing
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
- Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
| Precision | Standard |
| Lubricant | Oil Preservative |
| Preload Level | None |
| O.D. | 72 mm |
| Limiting Speed | 24000 rpm |
| Inner Ring Width | 17 mm |
| Material | Steel |
| Snap Ring | No Snap Ring |
| Fillet Radius | 1.1 mm |
| Bore Type | Round Bore |
| Inch/Metric | Metric Bore |
| Cage Material | Steel |
| Limiting Speed - Grease | 9000 rpm |
| Contact Angle | 0° |
| Enclosure | Open |
| Static Load Rating [Max] | 3440 lbf |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Seal Material | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Type | Unsealed |
| Dynamic Load Rating | 5730 lbf |
| icNumber | 7696004 |
| Limiting Speed - Sealed | 6300 rpm |
| Outer Ring Width | 17 mm |
| Pre Lubricant | None |
| Origin | Single Row Radial |
| Ball Material | Steel |
| Limiting Speed - Oil | 11000 rpm |
| I.D. | 35 mm |
| O.D. Type | Straight |
| Radial Internal Clearance | C3 |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Weight | 0.62 LB |
