Find a Service Center
- Duplex Set
- 0.9385" ID x 2.4409" OD x 5/8" Wide
- Extra Precision
- Universal Mounting
- 1,000 lb Preload
description
- Series L nonseparable angular contact bearings have cutaway shoulders on both the inner and outer rings. They can support very high thrust loads in one direction or combinations of radial and thrust loads, but not radial loading alone. They are designed to provide machine tool drive systems with extreme axial rigidity, low drag torque and minimal lateral runout.
applications
- NC machine tools
- Ball screw supports
- Tool frames
- Cross slides
- X-Y table positioners
- Transfer tables
caution
- Not recommended for new applications.
| Width of Set | 1 1/4 in |
| Preload Level | Heavy |
| O.D. | 2.44094 in |
| Axial Spring Constant | 6.6 lb/in |
| Bore Type | Round Bore, Inch Type |
| Drag Torque of Preloaded Set | 2.8 lb/in |
| Lubricant | Exxon Andok C |
| I.D. | 0.9385 in |
| Bearing Type | Ball Screw Support Bearing |
| O.D. Type | Straight |
| Extended Thrust Dynamic Load Rating | N/A |
| Ball Dia. | 1/4 in |
| Radial Internal Clearance Specification | Normal Clearance |
| Housing Shoulder Diameter | 2.13 in |
| Preload Amount | 1000 lbf |
| Fillet Radius | 0.04 in |
| No. of Balls | 21 |
| Contact Angle | 65° |
| Precision Level | Extra Precision (ABEC 7) |
| Bearing Arrangement | Universal |
| No. in Set | Duplex Set |
| Cage Material | Phenolic |
| Enclosure | Open |
| Dynamic Thrust Capacity | 3850 lb |
| Ball Material | Steel |
| Limiting Speed - Oil | 2400 rpm |
| Material | Steel |
| Weight | 1.0 LB |
| EAN or UPC | 697150090014 |
