Find a Service Center
- 1/4" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- External shafts and pins
- External E ring. Perhaps the most popular and widely-used radial retaining ring is the "E." The three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
| Tape Rings Stack | 250 |
| Thickness | 0.025 in |
| Inch/Metric | Inch |
| Tape Length of Stack | 6.25 in |
| Limiting Speed | 25000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 115 lbf |
| Edge Margin | 0.04 in |
| Clearance Installed in Groove | 0.54 in |
| Material | Stainless Steel |
| Length of Stack | 6.25 in |
| Shaft Dia. | 0.25 in |
| Plating | N/A |
| Load Capacity [Max] | 255 lbs |
| RPM Limit | 25000 rpm |
| Tape Width | 1 in |
| Series | E |
| Outside Dia. | 0.527 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 259 lbf |
| Groove Depth | 0.02 in |
| Type | Radially Assembled |
| Package Type | Stacked |
| Weight | 0.02 LB |
| EAN or UPC | 721717005125 |
