ZAS2111

Solid Pillow Block

Item #101158660

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Bolt Hole Length	7/8 in
Center Line to Base Dimension [Min]	2 1/8 in
Series	2000
Housing Construction	1 Piece
Length Through Bore	3.125 in
Bearing Type	Spherical Roller Bearing
RPM [Max]	4450 rpm
Bolt Holes	2
Size Code	5
End Type	Open End
Handle / Housing Material	Cast Iron
Base Height	1 5/16 in
Inch/Metric	Inch
Base Width	2 1/2 in
Bolt Hole Size	7/8 in
Mounted Unit Duty	Normal-Duty
Lubrication	Exxon Ronex MP
Shaft Dia.	1.6875 in
Flange Type	2-Bolt Flange
Housing Height	4 3/8 in
Pillow Block Type	Thru-Bolt
Grease Fitting Size	1/8 in NPT
Base Length	7 1/8 in
Bolt Size	1/2 in
Insert Type	Steel Insert
Temperature Range [Max]	200 °F, 225 °F
Bearing Design	Expansion
Bolt Hole Spacing	5 1/2 in
Housing Material	Cast Iron
Seal Type	Clearance Seals
Collar Extension	11/16 in
Temperature Range [Min]	-20 °F
Locking Device	Single Setscrew Locking Collar
Weight	9.5 LB
EAN or UPC	698210695590