AMP5207F

Solid Pillow Block

Item #101549494

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Mounted Unit Duty	Heavy-Duty
Grease Fitting Size	1/8 in NPT
RPM [Max]	2000 rpm
Pillow Block Type	Thru-Bolt
Base Length	11 1/4 in
Bolt Hole Size	1.938 in
Insert Type	Steel Insert
Housing Material	Cast Iron
Flange Type	4-Bolt Flange
Base Height	1 1/8 in
Temperature Range [Min]	-20 °F
Center Line to Base Dimension [Min]	3 in
Series	5000
Seal Type	Heavy Contact Seals, Spring Loaded Heavy Contact Seals
Housing Construction	1 Piece
Bolt Hole Length	1 15/16 in
Bearing Design	Non-Expansion
Temperature Range [Max]	200 °F, 225 °F
End Type	Two Open Auxiliary Cap Seals
Lubrication	Exxon Ronex MP
Length Through Bore	4.375 in
Size Code	8
Bearing Type	Spherical Roller Bearing
Handle / Housing Material	Cast Iron
Inch/Metric	Inch
Shaft Dia.	2.4375 in
Bolt Size	5/8 in
Housing Height	6 in
Bolt Hole Spacing	8 1/4 in
Bolt Hole Spacing - Width	2.625 in
Base Width	4 1/2 in
Bolt Holes	4
Locking Device	Double Setscrew Locking Collar
Weight	30.0 LB
EAN or UPC	698210685317