25GSA40 56C1.25

GSA Series Worm Gear Reducer

Item #101396927

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Install guards according to applicable local and national codes for rotating shafts.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Input (Shaft or Bore) Size	5/8 in
Frame Size	56C
Worm Position	Top
Box Height	8 1/4 in
Torque Out @ 1750 rpm	1139 in lb
Max. Overhung Load @ 1750 rpm	N/A
Input HP @ RPM	0.88 hp @ 1150 rpm, 1.07 hp @ 1750 rpm
Motor Application	General Purpose
Base to Shaft Center Height w/Std. Base Kit	N/A
Output RPM @ Input RPM	44 rpm @ 1750 rpm
Box Length	9 1/16 in
Thermal Input Horsepower @ 1750 RPM	N/A
Box Width	6 5/8 in
Base to Shaft Center Height Basic Unit	3 5/16 in
Reduction Type	Single Reduction
Ratio	40:1
Bolt Centers w/ Std. Base Kit (in)	N/A
Max. Thrust Load @ 1150 rpm	N/A
Input Configuration	C-Face Quilled
Output Torque @ RPM	1139 in lb @ 1750 rpm, 1361 in lb @ 1150 rpm
Center Distance	2.5 in
Output (Shaft or Bore) Size	1 1/4 in
Input Base to Shaft Center Height Basic Unit	5 13/16 in
Output RPM @ 1750 rpm Input	43.75 rpm
Output Configuration	Hollow Shaft w/ Torque Arm
Frame	56C
Washdown Duty	No
Torque Out @ 1150 rpm	1361 in lb
HP @ RPM	1 hp @ 1800 rpm
Weight	29.5 LB