25GSA30 56C1.25

GSA Series Worm Gear Reducer

Item #101446601

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Input Base to Shaft Center Height Basic Unit	5 13/16 in
Torque Out @ 1750 rpm	1155 in lb
Max. Thrust Load @ 1150 rpm	N/A
Output RPM @ Input RPM	58 rpm @ 1750 rpm
Center Distance	2 1/2 in
Output Configuration	Hollow Shaft w/ Torque Arm
Input Configuration	C-Face Quilled
Output RPM @ 1750 rpm Input	58.33 rpm
Worm Position	Top
Bolt Centers w/ Std. Base Kit (in)	N/A
Motor Application	General Purpose
Box Length	9 1/16 in
Output Torque @ RPM	1155 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm
Washdown Duty	No
Base to Shaft Center Height Basic Unit	3 5/16 in
Box Width	6 5/8 in
Frame Size	56C
HP @ RPM	1 hp @ 1800 rpm
Max. Overhung Load @ 1750 rpm	N/A
Base to Shaft Center Height w/Std. Base Kit	N/A
Frame	56C
Output (Shaft or Bore) Size	1 1/4 in
Ratio	30:1
Input (Shaft or Bore) Size	5/8 in
Input HP @ RPM	1.13 hp @ 1150 rpm, 1.37 hp @ 1750 rpm
Reduction Type	Single Reduction
Box Height	8 1/4 in
Torque Out @ 1150 rpm	1390 in lb
Thermal Input Horsepower @ 1750 RPM	N/A
Weight	29.35 LB