20GSA40 56C1.18

GSA Series Worm Gear Reducer

Item #101433140

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

The working range knob is designed to permit outlet pressures within their full range. Pressure adjustments beyond this range are also possible because the knob is not a limiting device.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Bolt Centers w/ Std. Base Kit (in)	N/A
Center Distance	2 in
Box Width	6 5/8 in
Worm Position	Top
Output RPM @ 1750 rpm Input	43.75 rpm
Max. Overhung Load @ 1750 rpm	N/A
Output (Shaft or Bore) Size	1 3/16 in
Torque Out @ 1150 rpm	776 in lb
Box Height	6 13/16 in
Output Configuration	Hollow Shaft w/ Torque Arm
Output Torque @ RPM	672 in lb @ 1750 rpm, 776 in lb @ 1150 rpm
Washdown Duty	No
Torque Out @ 1750 rpm	672 in lb
Thermal Input Horsepower @ 1750 RPM	N/A
Output RPM @ Input RPM	44 rpm @ 1750 rpm
Box Length	8 1/16 in
Frame	56C
Ratio	40:1
Input HP @ RPM	0.52 hp @ 1150 rpm, 0.65 hp @ 1750 rpm
Max. Thrust Load @ 1150 rpm	N/A
Frame Size	56C
Reduction Type	Single Reduction
Input Base to Shaft Center Height Basic Unit	4 3/4 in
Input Configuration	C-Face Quilled
Input (Shaft or Bore) Size	5/8 in
Motor Application	General Purpose
HP @ RPM	0.5 hp @ 1800 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Base to Shaft Center Height Basic Unit	2 3/4 in
Weight	22.5 LB
EAN or UPC	662288077978