18GSA60 56C.75

GSA Series Worm Gear Reducer

Item #101388212

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Install guards according to applicable local and national codes for rotating shafts.

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Input HP @ RPM	0.28 hp @ 1150 rpm, 0.34 hp @ 1750 rpm
Box Length	6 9/16 in
Reduction Type	Single Reduction
Frame	56C
Box Width	5 3/4 in
Center Distance	1 3/4 in
Max. Thrust Load @ 1150 rpm	N/A
Output RPM @ 1750 rpm Input	29.2 rpm
Box Height	6 3/8 in
Motor Application	General Purpose
Input Configuration	C-Face Quilled
Output (Shaft or Bore) Size	3/4 in
HP @ RPM	0.25 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Output Configuration	Hollow Shaft w/ Torque Arm
Output Torque @ RPM	446 in lb @ 1750 rpm, 512 in lb @ 1150 rpm
Torque Out @ 1750 rpm	446 in lb
Input Base to Shaft Center Height Basic Unit	4.5 in
Bolt Centers w/ Std. Base Kit (in)	N/A
Frame Size	56C
Max. Overhung Load @ 1750 rpm	N/A
Base to Shaft Center Height Basic Unit	2.75 in
Worm Position	Top
Torque Out @ 1150 rpm	512 in lb
Washdown Duty	No
Input (Shaft or Bore) Size	5/8 in
Base to Shaft Center Height w/Std. Base Kit	N/A
Ratio	60:1
Output RPM @ Input RPM	29 rpm @ 1750 rpm
Weight	14.0 LB