Skip to content Skip to navigation menu
Hub CityPB251NX1 1/2

PB251NX1 1/2

PB251N Series Nickel Plated Pillow Block
Item #101033139
  • PB251N Series Normal-Duty Pillow Block
  • 1 1/2" Shaft
  • 5 17/32" Bolt Centers
  • 2" Center Line to Base
  • Setscrew Locking Collar
  • Cast Iron - Nickel Plated
  • Regreasable
  • Contact Seals
+ Show More + Show Less
Hub CityPB251NX1 1/2
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • PB251N Series Normal-Duty Pillow Block
  • 1 1/2" Shaft
  • 5 17/32" Bolt Centers
  • 2" Center Line to Base
  • Setscrew Locking Collar

features

  • Molded glass fiber reinforced polyamide retainer
  • Grade 10 balls
  • Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
  • Slotted bolt holes
  • Rugged cast iron or Hub-Alloy® housing
  • Zone-hardened inner race
  • Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
  • Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
  • Knurled cup point setscrews at 120° to minimize inner ring distortion
  • Recessed housing base to accommodate uneven mounting surfaces
  • Spherical outer race to allow up to 1.5° misalignment
  • All bearings have single lip Nitrile rubber seals with steel trash guard
  • Steel fingers are standard on wide inner race bearings only
Bearing Type Ball Bearing
Temperature Range [Min] -25 °F
Misalignment Range ±1 1/2°
Mounted Unit Duty Normal-Duty
Series PB251N
End Type Open End
Housing Height 4 in
Bolt Hole Spacing Range [Max] 5 15/16 in
Temperature Range [Max] 225 °F
Housing Construction 1 Piece
Lubrication Relubricatable
Bolt Hole Spacing Range [Min] 5 1/8 in
Bolt Holes 2
Locking Device Setscrew Locking Collar
Overall Width 2 1/16 in
Shaft Dia. 1.5 in
Center of Bearing to Front of Inner Ring 1.122 in
Bearing Insert B250X1 1/2
Length Through Bore 1.575 in
Base Height 13/16 in
Insert Type Steel Insert
Pillow Block Type Thru-Bolt
Housing Material Cast Iron - Nickel Plated
Bearing Design Non-Expansion
Base Width 1 7/8 in
Seal Type Contact Seals
Inch/Metric Inch
Collar O.D. 2.039 in
Bolt Hole Spacing 5 17/32 in
Bolt Size 1/2 in
Housing Width 1 7/8 in
Base Length 7 1/8 in
Weight 5.0 LB
EAN or UPC 662798249711
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison