Hub City | PB150X1 1/4S | PB150 Series HUB-ALLOY® Pillow Block

PB150X1 1/4S

PB150 Series HUB-ALLOY® Pillow Block

Item #101032756

Hub-Alloy®

Regreasable

Contact Seals

+ Show More

Auto Replenish

each One-time purchase

Product Details

Molded glass fiber reinforced polyamide retainer
Grade 10 balls
Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
Slotted bolt holes
Rugged cast iron or Hub-Alloy® housing
Zone-hardened inner race
Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
Knurled cup point setscrews at 120° to minimize inner ring distortion
Recessed housing base to accommodate uneven mounting surfaces
Spherical outer race to allow up to 1.5° misalignment
All bearings have single lip Nitrile rubber seals with steel trash guard
Steel fingers are standard on wide inner race bearings only

Specifications

Temperature Range [Max]	225 °F
Pillow Block Type	Thru-Bolt
Temperature Range [Min]	-25 °F
Base Width	1 5/16 in
Bearing Type	Ball Bearing
Housing Construction	1 Piece
Bolt Holes	2
Misalignment Range	±1 1/2°
Bolt Size	1/2 in
Bolt Hole Spacing	4 23/32 in
Length Through Bore	1.22 in
Locking Device	Setscrew Locking Collar
Base Length	5 15/16 in
Bearing Design	Non-Expansion
End Type	Open End
Inch/Metric	Inch
Seal Type	Contact Seals
Series	PB150
Housing Height	3 5/32 in
Mounted Unit Duty	Light-Duty
Insert Type	Steel Insert
Housing Width	1 5/16 in
Overall Width	1 33/64 in
Lubrication	Relubricatable
Shaft Dia.	1.25 in
Base Height	13/32 in
Bearing Insert	B250X1 1/4S
Housing Material	Hub-Alloy®
Bolt Hole Spacing Range [Min]	4 7/16 in
Bolt Hole Spacing Range [Max]	5 in
Collar O.D.	1.563 in
Center of Bearing to Front of Inner Ring	0.866 in
Weight	2.0 LB
EAN or UPC	662798247205

PB150X1 1/4S