Skip to content Skip to navigation menu
PB150L Series HUB-ALLOY® Pillow Block

PB150LX1 1/4

PB150L Series HUB-ALLOY® Pillow Block
Item #101032767
  • PB150L Series Light-Duty Pillow Block
  • 1 1/4" Shaft
  • 5" Bolt Centers
  • 1 13/16" Center Line to Base
  • Setscrew Locking Collar
  • Hub-Alloy®
  • Regreasable
  • Contact Seals
+ Show More + Show Less
PB150L Series HUB-ALLOY® Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • PB150L Series Light-Duty Pillow Block
  • 1 1/4" Shaft
  • 5" Bolt Centers
  • 1 13/16" Center Line to Base
  • Setscrew Locking Collar

features

  • Molded glass fiber reinforced polyamide retainer
  • Grade 10 balls
  • Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
  • Slotted bolt holes
  • Rugged cast iron or Hub-Alloy® housing
  • Zone-hardened inner race
  • Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
  • Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
  • Knurled cup point setscrews at 120° to minimize inner ring distortion
  • Recessed housing base to accommodate uneven mounting surfaces
  • Spherical outer race to allow up to 1.5° misalignment
  • All bearings have single lip Nitrile rubber seals with steel trash guard
  • Steel fingers are standard on wide inner race bearings only
Collar O.D. 1.815 in
Series PB150L
Mounted Unit Duty Light-Duty
Bearing Type Ball Bearing
Housing Construction 1 Piece
Bolt Hole Spacing 5 in
Bolt Holes 2
Bearing Design Non-Expansion
Housing Material Hub-Alloy®
Base Width 1 3/8 in
Seal Type Contact Seals
Pillow Block Type Thru-Bolt
Temperature Range [Max] 225 °F
Overall Width 1 11/16 in
Insert Type Steel Insert
Base Length 6 1/4 in
Lubrication Relubricatable
Bolt Size 1/2 in
Bolt Hole Spacing Range [Min] 4 23/32 in
Inch/Metric Inch
Base Height 13/32 in
Bolt Hole Spacing Range [Max] 5 9/32 in
Bearing Insert B250X1 1/4
Misalignment Range ±1 1/2°
Center of Bearing to Front of Inner Ring 1.004 in
Length Through Bore 1.378 in
Shaft Dia. 1.25 in
Locking Device Setscrew Locking Collar
Temperature Range [Min] -25 °F
Housing Height 3 1/2 in
Housing Width 1 3/8 in
End Type Open End
Weight 2.0 LB
EAN or UPC 662798247373
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison