Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
| Material | Steel |
| Hub Projection (in) | 0.5 |
| Face Width (in) | 0.75 |
| Hub Diameter (in) | 1.3125 |
| Length Through Bore (in) | 1.25 |
| Pitch Diameter (in) | 1.5 |
| Diametral Pitch | 16 |
| Bore (Min) (in) | 0.75 |
| Bore (Max) (in) | 0.75 |
| Bore Type | Finished Bore |
| Number of Teeth/Threads | 24 |
| Outside Diameter (in) | 1.62 |
| Pressure Angle | 20 |
| Bore Size (in) | 0.75 |
| Standards Met | AGMA |
| Overall Length (in) | 1.25 |
| Weight | 0.42 LB |
| EAN or UPC | 662289308736 |
