Skip to content Skip to navigation menu
765805 / Setscrew Lock Ball Bearing

VF2S-223AH

765805 / Setscrew Lock Ball Bearing
Item #100935589
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material
  • 1.44 in Inside Diameter
+ Show More + Show Less
765805 / Setscrew Lock Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal and flinger
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Radial Dynamic Load Capacity (lb) 5782
Retainer Material Molded Fiber Glass Reinforced Nylon
Retainer Type Ball Riding Retainer
Overall Width (in) 3.625
End Cap No
Replaceable Insert Yes
Inner Ring OD (in) 1.859
Heat Treat Method (Inner Race) Zone-Hardened
Outer Ring Land Profile Standard
Housing Material Cast Iron
Housing Width 1.16 in
Misalignment Type Static Only
Bore Size - Inch 1.438
Radial Dynamic Load Capacity 5782 lb
Measure Units Inch
Insert Material 52100 Bearing Steel, Black Oxided Inner
Relubricatable Yes
Radial Static Load Capacity 3493 lb
Overall Width 3.63 in
Duty Series Normal
Inch/Metric Inch
Pilot Configuration No Pilot
Seal Type Single Lip Contact with Flinger
Centerline to Front Face (in) 1
Bolt Center-to-Center Length (in) 5.125
Bore Type Straight
Flange Type 2-Bolt Flange
Insert No. VS-223
Bearing Insert Coating Black Oxide Coated Inner Ring
Inner Race Heat Treat Method Zone-Hardened
Internal Clearance Standard
Platform Air Handling
Foot Height (in) 0.594
Bolt Size (in) 1/2
Overall Length (in) 6.125
I.D. 1.44 in
Finish Black Oxide Coated Inner Ring
Mounted Unit Duty Normal
Overall Height to Inner Ring (in) 1.75
Maximum Operating Temperature 200
Bolt Size 1/2 in
Foot Height 0.59 in
Housing Width (in) 1.15625
Radial Static Load Capacity (lb) 3493
Housing Construction One Piece
Overall Height to Inner Ring 1.75 in
Lubrication Lithium Complex NLGI 2 Grease
Expansion No
Housing Base Semi-Solid
Bore Shape Straight
Weight 2.66 LB
EAN or UPC 662460066073
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison