SSF2S-112

Intermediate Duty 2-Bolt Flange Unit

Item #100936372

0.75 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Single lip contact seal
Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews

Specifications

Mounted Unit Duty	Intermediate
Retainer Material	Molded Fiber Glass Reinforced Nylon
Housing Width	1.63 in
Foot Height	0.17 in
Lubrication	Lithium Complex NLGI 2 Grease
Radial Dynamic Load Capacity (lb)	2611
Radial Static Load Capacity (lb)	1444
Bore Shape	Straight
Seal Type	Single Lip Contact Seal
Pilot Configuration	No Pilot
Finish	Uncoated
Misalignment Type	Static Only
Overall Width (in)	1.625
Length Through Bore	1.06 in
Duty Series	Intermediate
Radial Static Load Capacity	1444 lb
Outer Ring Land Profile	Standard
Flange Type	2-Bolt Flange
Heat Treat Method (Inner Race)	Zone-Hardened
Retainer Type	Ball Riding Retainer
Bolt Size	0.31 in
Expansion	No
Inch/Metric	Inch
Relubricatable	Yes
Insert Material	52100 Bearing Steel
Bore Size - Inch	0.75
RPM [Max]	4000 rpm
Inner Ring OD (in)	1.188
Bolt Center-to-Center Length (in)	2.8130
Overall Length (in)	3.563
Housing Width (in)	1.625
Replaceable Insert	Yes
Measure Units	Inch
Bore Type	Straight
Overall Height to Inner Ring	1.06 in
I.D.	0.75 in
Bearing Insert Coating	Uncoated
Radial Dynamic Load Capacity	2611 lb
Insert No.	LS-112
Housing Construction	Two Piece
Foot Height (in)	0.172
Bolt Size (in)	0.3125
Overall Width	1.63 in
Inner Race Length (in)	1.0625
Overall Height to Inner Ring (in)	1.063
Length Through Bore (in)	1.0625
Inner Race Heat Treat Method	Zone-Hardened
Overall Height (in)	1.063
Maximum Operating Temperature	200
End Cap	No
Internal Clearance	Standard
Housing Material	Stamped Steel
Centerline to Front Face (in)	0.718
Weight	0.6 LB
EAN or UPC	662460336954