Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 14 Teeth
- 1.400" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
| Length Through Bore | 1.87 in |
| Bore Type | Finished |
| Torque at 200 RPM | 431 lb/in |
| Hub Dia. | 1.11 in |
| Set Screw Size | 5/8 |
| Material | Steel |
| Torque at 600 RPM | 354 lb/in |
| Outside Dia. | 1.6 in |
| Torque at 900 RPM | 312 lb/in |
| Pressure Angle | 20 ° |
| Bore Size | 0.625 in |
| Set Screw | Yes |
| Torque at 300 RPM | 409 lb/in |
| No. of Teeth | 14 |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | w/Setscrew |
| Torque at 1200 RPM | 279 lb/in |
| Pitch Diameter | 1.4 in |
| Diametral Pitch | 10 |
| Torque at 1800 RPM | 230 lb/in |
| Origin | Finished Bore |
| Weight | 0.401 LB |
| EAN or UPC | 781711461747 |
