Find a Service Center
Alternate Products
- Finished Steel Gear
- 12 Diametral Pitch
- 20.0° Pressure Angle
- 15 Teeth
- 1 1/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Set Screw | Yes |
| Length Through Bore | 1.62 in |
| Material | Steel |
| No. of Teeth | 15 |
| Outside Dia. | 1.42 in |
| Bore Type | Finished |
| Torque at 300 RPM | 259 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 600 RPM | 227 lb/in |
| Torque at 1800 RPM | 152 lb/in |
| Torque at 200 RPM | 271 lb/in |
| Set Screw Size | 5/8 |
| Torque at 1200 RPM | 182 lb/in |
| Diametral Pitch | 12 |
| Keyway | w/Setscrew |
| Origin | Finished Bore |
| Bore Size | 0.625 in |
| Hub Dia. | 0.98 in |
| Pitch Diameter | 1.25 in |
| Torque at 900 RPM | 202 lb/in |
| Pressure Angle | 20 ° |
| Weight | 0.301 LB |
| EAN or UPC | 781711461617 |
