Boston Gear

SBKF724B10B5G

700 Series C-Face Quilled Bost-Kleen Reducer w/Stainless Epoxy

Item #102943135

2 3/8" Center Distance
10:1 Ratio
56C Frame
C-Face Quilled Input
Left Output

Top Worm Position

No Lubricant

Cast Iron, Stainless Steel Epoxy Coating

+ Show More

Auto Replenish

each One-time purchase

Product Details

2 3/8" Center Distance
10:1 Ratio
56C Frame
C-Face Quilled Input
Left Output

features

Washable
Corrosion-resistant
Cast iron housing
Plated pressure relief valves
Double lipped oil seals
Excluder seal on output shaft
Hard nontoxic metallic finish
Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

compliances

caution

If the bearing is to be shrink fitted, care is required to prevent damage to the bearing. Cool the bearing gradually. Do not cool the bearing below -20 °F (-28 °C). Dry ice or other super cool materials should not be used. Pounding the bearing in a chille

Specifications

Motor Application	Washdown Duty
Lubrication	None
Base to Shaft Center Height w/Vert. "J" Base Kit	4.06 in
Output (Shaft or Bore) Size	1 1/8 in
Installed Options	High Horizontal Base
Output Torque @ RPM	1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm
Washdown Duty	Yes
Shaft Assembly Code	G
Reduction Type	Single Reduction
Max. Thrust Load @ 1150 rpm	900 lb/in
Ratio	10:1
Input HP @ RPM	2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in)	7 1/16 x 4 7/8
Torque Out @ 1150 rpm	1025 in lb
Base to Centerline of Input Shaft	5 5/8 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.38 in
Max. Thrust Load @ RPM	900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Fan Cooled	No
Input Configuration	C-Face Quilled
Max. Overhung Load @ RPM	900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm
Torque Out @ 1750 rpm	1069 in lb
Output Configuration	Left Output
Use With	724
Base to Centerline of Output Shaft	3 1/4 in
Base to Shaft Center Height w/High Vert. Base Kit	5 1/4 in
Worm Position	Top
Bore Code	B5
Thermal Input Horsepower @ 1750 RPM	N/A
Output RPM @ Input RPM	175 rpm @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit	5.19 in
Center Distance	2 3/8 in
Family Name	SBKF
Max. Overhung Load @ 1750 rpm	900 lb/in
Box Length	6 3/8 in
Input (Shaft or Bore) Size	5/8 in
Frame Size	56C
Output RPM @ 1750 rpm Input	175 rpm
Bolt Centers w/ Vertical "J" Base Kit (in)	9.19 x 2.88
Bolt Center	7 1/16 in x 4 7/8 in
Box Height	7 11/16 in
Max. Input HP @ 100 rpm	0.27 hp
HP @ RPM	3 hp @ 1800 rpm
Box Width	5 7/16 in
Housing Material	Cast Iron, Stainless Steel Epoxy Coating
Bolt Centers w/ Vertical Base Kits (in)	8.94 x 4.88
Frame	56C
Weight	32.0 LB