RFWC752-1200E-B5-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871431

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Input (Shaft or Bore) Size	5/8 in
Family Name	RFWC
Reduction Type	Double Reduction
Base to Centerline of Input Shaft	N/A
Shaft Assembly Code	G
Output (Shaft or Bore) Size	2 in
Output RPM @ 1750 rpm Input	1.46 rpm
Lubrication	None
Base to Shaft Center Height w/Low Vert. Base Kit	6.38 in
Ratio	1200:1
Thermal Input Horsepower @ 1750 RPM	N/A
Max. Overhung Load @ 1750 rpm	2200 lb/in
Bolt Center	11" x 5 13/16"
Base to Shaft Center Height w/High Vert. Base Kit	8.63 in
Bolt Centers w/ Std. Base Kit (in)	14 1/8 x 8 3/8
Box Length	9 51/64 in
Center Distance	5 5/32 in
Output Configuration	Left Output
Box Height	13 3/4 in
Input Configuration	C-Face Coupled
Washdown Duty	No
Frame	56C
Frame Size	56C
Housing Material	Cast Iron
Fan Cooled	No
Base to Shaft Center Height w/Std. Base Kit	6.44 in
Torque Out @ 1150 rpm	N/A
Motor HP	3/4 hp
Box Width	18 35/64 in
Torque Out @ 1750 rpm	12610 in lb
Bore Code	B5
Worm Position	Universal¦Right Angle
Motor Application	General Purpose
HP @ RPM	0.75 hp @ 1800 rpm
Bolt Centers w/ Vertical Base Kits (in)	18.00 x 10.00
Base to Centerline of Output Shaft	5 5/16 in
Max. Thrust Load @ 1150 rpm	1900 lb/in
Keyway Size	3/16 x 3/32
Weight	253.1 LB
EAN or UPC	781711531440