RFWC718-900-B4-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101877750

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Drives used in a vertical mounting application may require additional pipe plugs and/or grease fittings for proper lubrication and are considered special.
High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.

Specifications

Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Box Width	8 7/8 in
Max. Overhung Load @ 1750 rpm	500 lb/in
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Keyway Size	1/8 x 1/16
Base to Centerline of Output Shaft	2 1/16 in
Bolt Center	4 3/16 in x 2 3/4 in
Input Configuration	C-Face Coupled
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Bore Code	B4
Family Name	RFWC
Motor Application	General Purpose
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Motor HP	0.17 hp
Worm Position	Universal¦Right Angle
Washdown Duty	No
Base to Centerline of Input Shaft	N/A
Output Configuration	Left Output
Center Distance	1 3/4 in
Torque Out @ 1750 rpm	710 in lb
Output (Shaft or Bore) Size	7/8 in
Box Length	5 1/16 in
Output RPM @ 1750 rpm Input	1.94 rpm
Reduction Type	Double Reduction
Shaft Assembly Code	G
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Box Height	5 3/4 in
Housing Material	Cast Iron
Fan Cooled	No
Max. Thrust Load @ 1150 rpm	500 lb/in
Frame Size	42CZ
Base to Shaft Center Height w/Std. Base Kit	4.38 in
HP @ RPM	0.08333333 hp @ 1800 rpm
Frame	42CZ
Lubrication	None
Input (Shaft or Bore) Size	1/2 in
Thermal Input Horsepower @ 1750 RPM	N/A
Torque Out @ 1150 rpm	N/A
Ratio	900:1
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Weight	34.1 LB
EAN or UPC	781711530993