Find a Service Center
- Size 1214
- 2:1 Ratio
- Single, Counter Clockwise, Left Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Assembly | F |
| Input Configuration | Shaft Input |
| Unit Size | 1214 |
| Output Configuration | Single |
| Input Relation to Base | No Base |
| Input Shaft Position | Facing You |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Bearing Type | Roller Bearing |
| Output (Shaft or Bore) Size | 1 in |
| Relative Shaft Rotation | Counter Clockwise |
| Output Shaft Position | Left |
| Shaft Arrangement | #4 |
| Box Width | 7 in |
| Output RPM @ 1750 rpm Input | 875 rpm |
| Output Relation to Base | No Base |
| Box Height | 4 1/8 in |
| Torque Out @ 1150 rpm | 697 in lb |
| Torque Out @ 1750 rpm | 563 in lb |
| Ratio | 2:1 |
| Box Length | 8 1/8 in |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Gear Style | Spiral Bevel |
| Weight | 25.001 LB |
| EAN or UPC | 781711610497 |
