FWC718-150-B4-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101350435

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Lubrication of Acme Nut assemblies determines the ultimate life of the assembly. Improper maintenance and dirty environment will lead to premature failure.

Specifications

Reduction Type	Double Reduction
Output (Shaft or Bore) Size	7/8 in
Max. Thrust Load @ 1150 rpm	500 lb/in
Ratio	150:1
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Frame Size	42CZ
Input (Shaft or Bore) Size	1/2 in
Washdown Duty	No
Fan Cooled	No
Bore Code	B4
Box Width	8 7/8 in
Bolt Center	4 3/16 in x 2 3/4 in
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Family Name	FWC
Base to Centerline of Output Shaft	2 1/16 in
Keyway Size	1/8 x 1/16
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Thermal Input Horsepower @ 1750 RPM	N/A
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Shaft Assembly Code	G
Frame	42CZ
Housing Material	Cast Iron
Input Configuration	C-Face Quilled
Output RPM @ 1750 rpm Input	11.67 rpm
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Centerline of Input Shaft	N/A
Box Length	5 1/16 in
Motor Application	General Purpose
HP @ RPM	0.25 hp @ 1800 rpm
Center Distance	1 3/4 in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Torque Out @ 1750 rpm	580 in lb
Torque Out @ 1150 rpm	N/A
Output Configuration	Left Output
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Motor HP	1/4 hp
Box Height	5 3/4 in
Max. Overhung Load @ 1750 rpm	500 lb/in
Worm Position	Universal¦Right Angle
Lubrication	None
Weight	26.1 LB
EAN or UPC	781711524329