Find a Service Center
- 3" Center Distance
- 30:1 Ratio
- C-Face Quilled
- Left Output
- 56C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Bolt Center | 7 in x 4 in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Frame | 56C |
| Lubrication | None |
| Output Configuration | Left Output |
| Box Width | 6 49/64 in |
| Frame Size | 56C |
| Family Name | F |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Center Distance | 3 in |
| Torque Out @ 1750 rpm | 2045 in lb |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Worm Position | Universal |
| Input HP @ RPM | 1.99 hp @ 1150 rpm, 2.27 hp @ 1750 rpm |
| Ratio | 30:1 |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Reduction Type | Single Reduction |
| Fan Cooled | No |
| Use With | 730 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Box Height | 8 7/8 in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Box Length | 8 1/8 in |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 2510 in lb |
| Motor Application | General Purpose |
| Output Torque @ RPM | 2045 in lb @ 1750 rpm, 2510 in lb @ 1150 rpm |
| Housing Material | Cast Iron |
| Input (Shaft or Bore) Size | 5/8 in |
| Weight | 55.1 LB |
| EAN or UPC | 781711607060 |
