Find a Service Center
- 3" Center Distance
- 25:1 Ratio
- C-Face Quilled
- Right Output
- 56C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Bolt Center | 7 in x 4 in |
| Ratio | 25:1 |
| Output Torque @ RPM | 2051 in lb @ 1750 rpm, 2560 in lb @ 1150 rpm |
| Use With | 730 |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Box Length | 8 1/8 in |
| Washdown Duty | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 5/8 in |
| Reduction Type | Single Reduction |
| Torque Out @ 1150 rpm | 2560 in lb |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Lubrication | None |
| Housing Material | Cast Iron |
| Frame | 56C |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Box Height | 8 7/8 in |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output Configuration | Right Output |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Box Width | 6 49/64 in |
| Torque Out @ 1750 rpm | 2051 in lb |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Family Name | F |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Worm Position | Universal |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Center Distance | 3 in |
| Input HP @ RPM | 2.3 hp @ 1150 rpm, 2.61 hp @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Weight | 55.1 LB |
| EAN or UPC | 781711607053 |
