BKF715B5B5J

700 Series C-Face Quilled Bost-Kleen Reducer

Item #102817933

Top Worm Position

No Lubricant

Cast Iron, White Epoxy Coating

+ Show More

Auto Replenish

each One-time purchase

Product Details

Washable
Corrosion-resistant
Durable white epoxy finish
Cast iron housing
Plated pressure relief valves
Double lipped oil seals
Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Must be filled to the proper level with the recommended lubricant for your application before operation

Specifications

Max. Overhung Load @ RPM	300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm
Lubrication	None
Reduction Type	Single Reduction
Shaft Assembly Code	J
Output Torque @ RPM	285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm
Base to Centerline of Input Shaft	4 1/16 in
Torque Out @ 1750 rpm	291 in lb
Max. Thrust Load @ RPM	400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Output RPM @ Input RPM	350 rpm @ 1750 rpm
Box Height	5 31/32 in
Bore Code	B5
Max. Thrust Load @ 1150 rpm	400 lb/in
Frame Size	56C
Input HP @ RPM	1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm
Installed Options	High Horizontal Base
Motor Application	Washdown Duty
Center Distance	1.54 in
Worm Position	Top
Output Configuration	Right Output
Ratio	5:1
Input Configuration	C-Face Quilled
Output (Shaft or Bore) Size	3/4 in
Family Name	F
Use With	715
Frame	56C
Torque Out @ 1150 rpm	285 in lb
Box Width	5 1/16 in
Output RPM @ 1750 rpm Input	350 rpm
Base to Centerline of Output Shaft	2 1/2 in
Max. Overhung Load @ 1750 rpm	300 lb/in
Input (Shaft or Bore) Size	5/8 in
Bolt Center Length x Bolt Center Width	5 1/4 in x 4 5/16 in
Fan Cooled	No
Base	Yes
Box Length	5 1/8 in
Bolt Center	5 1/4 in x 4 5/16 in
HP @ RPM	1.5 hp @ 1800 rpm
Washdown Duty	Yes
Housing Material	Cast Iron¦White Epoxy Coating
Weight	19.0 LB