Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- Shaft Input
- Left & Right Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Tags shall contain a signal word and a major message.
- Danger tags indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury. The signal word Danger is to be limited to the most extreme situations. Danger tags should not be used for property damage hazards unless
- Note: A tag shall not be used in place of a permanent sign or label intended for hazards in normal use, operation or maintenance.
| Torque Out @ 1150 rpm | 2425 in lb |
| Box Length | 8 45/64 in |
| Lubrication | None |
| Output Configuration | Left & Right Output |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance | 3 in |
| Family Name | Std Unit |
| Housing Material | Cast Iron |
| Input Configuration | Shaft Input |
| Ratio | 15:1 |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Bolt Center | 7 in x 4 in |
| Torque Out @ 1750 rpm | 1969 in lb |
| Frame Size | Shaft Input, Not a C-Face |
| Use With | 730 |
| Fan Cooled | No |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Input (Shaft or Bore) Size | 7/8 in |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Frame | N/A |
| Box Height | 8 7/8 in |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Box Width | 6 49/64 in |
| Reduction Type | Single Reduction |
| Worm Position | Universal |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Washdown Duty | No |
| Weight | 55.1 LB |
| EAN or UPC | 781711648308 |
