Find a Service Center
- Single Row Radial Bearing
- 3/8" ID x 7/8" OD x 9/32" Wide
- Double Shielded
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Precision Level | Standard (ABEC 1) |
| Ball Material | Steel |
| Cage Material | Nylon |
| I.D. | 3/8 in |
| Bore Type | Round Bore |
| O.D. | 0.875 in |
| Limiting Speed - Oil | 6000 rpm |
| Sealed Width | 11/32 in |
| Precision | Standard |
| Limiting Speed - Grease | 6000 rpm |
| Origin | Single Row Radial |
| Outer Ring Width | 9/32 in |
| Seal Type | Non-Contact Seals |
| Locking Device | No Locking Device |
| Static Load Rating [Max] | 255 lbf |
| Fillet Radius | 0.015 in |
| Pre Lubricant | None |
| Cage Type | Plastic |
| Enclosure | Double Shielded |
| Inch/Metric | Inch Bore |
| Contact Angle | 0° |
| Dynamic Load Rating | 644 lbf |
| Snap Ring | No Snap Ring |
| Seal Material | Metal |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Width | 9/32 in |
| Radial Internal Clearance | Normal |
| Material | Steel |
| Shielded Width | 9/32 in |
| icNumber | 7695900 |
| Limiting Speed | 6000 rpm |
| Inner Ring Width | 9/32 in |
| Radial Internal Clearance Specification | Normal Clearance |
| Lubricant | General Purpose |
| Preload Level | None |
| Rows of Balls | Single |
| Weight | 0.03 LB |
| EAN or UPC | 637400291327 |
