
- SW Series Normal-Duty Pillow Block
- 100 mm Shaft
- 308 mm Bolt Hole Spacing
- 115.000 mm Center Line to Base
- Cast Iron
Mounted Unit Duty | Normal-Duty |
Housing No. | SW220 |
Base Width | 95 mm |
Series | SW |
Shaft Dia. | 100 mm |
Bearing Type | Ball Bearing |
Bolt Hole Length | 38 mm |
Base Length | 380 mm |
Bolt Hole Spacing | 308 mm |
Bolt Holes | 2 |
Bearing Insert | HC220-100 |
Pillow Block Type | Thru-Bolt |
Housing Material | Cast Iron |
End Type | Open End |
Housing Height | 225 mm |
Housing Construction | 1 Piece |
Seal Type | Contact Seals |
Bearing Design | Non-Expansion |
Base Height | 40 mm |
Inch/Metric | Metric |
Lubrication | Relubricatable |
Overall Width | 97 mm |
Bolt Hole Width | 30 mm |
Locking Device | Eccentric Locking Collar |
Weight | 35.2 LB |
EAN or UPC | 800675139803 |
