Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
caution
All conveyor troughs should have some type of cover not only to keep material inside the trough and to protect material in the trough from outside elements, but also as a safety precaution.
Basic Size
3/8 in
Actuator Type
Solenoid
Installed Options
None
Valve Size
3/8 in
Stations
N/A
Operation
Electric
Valve Body Style
Manifold Mounted
Valve Duty
Standard Duty
Operator
Solenoid w/Light & Locking Override
Operating Pressure Range
35 psi to 140 psi
Spool Description
N/A
Lights
Yes
Port Size
3/8
Wiring Options
None
Return Type
Spring
Voltage Rating
24 VDC
Cv Flow
4.8
Valve Type
4-Way, 2 Position
Port Type
NPT
Overrides
No Overrides
Height
8.740 in
Series
Valvair II Series
Solenoid
Single
Length
10.460 in
Coil Style
Encapsulated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
